Briolina Srl
Menu
It En

Finishes

 Composition 100% genuine leather  Fire resistant BS5852-1 cigarette test, BS5852-1 match test, TB117-2013 cigarette test, IMO FTPC Part 8 Res. A652 (16)  Long life  Thickness ± 1 mm

 

CARE OF MATERIAL     SUGGESTIONS FOR CLEANING AND MAINTENANCE

 

KE - Directions for removing the most common dirt and stains:

Regular cleaning on genuine leather is recommended to maintain the original appearance of the upholstery and extend its life. Dust and dirt wear the coating, so periodic cleaning using a white cloth dampened with warm water is recommended. It is essential to act quickly on stains. Immediately remove any liquid substances or other residues to avoid absorption and permanent stains. Liquids should be absorbed with a napkin, absorbent paper or a white absorbent cloth. Non-greasy stains can be removed by dabbing gently with a damp sponge or a white lint-free cloth moistened with a solution of warm water and neutral soap. Do not use aggressive cleaning agents. Do not use bleaches, detergents, stain removers, degreasers, denatured alcohol, ammonia, solvents, other acidic, alkaline or abrasive cleaners as they could damage the material. If you want to use detergents other than neutral soap, we recommend that you test the product beforehand to check the effect and any discoloration in an area not exposed to sight, making sure that the material does not undergo any alterations. A clean, damp cotton cloth is ideal for most stains. Do not scrub vigorously, but try to remove the stain mainly by dabbing and making circular movements towards the center of the stain. For any drying it is preferable to use a clean cotton cloth. These tips are our recommendations only and do not guarantee complete stain removal. We assume no warranty for any damage caused by incorrect care, unsuitable cleaning agents or improper use.

 KE20 cream
 KE39 taupe
 KE49 cognac
 KE19 brown
 KE29 dark brown
 KE15 black
 Composition 72% RPET (recycled polyethylene) 28% PL (polyester)  Eco friendly Oeko-Tex Standard 100, all recycled fibers  Fire resistant BS5852-1 cigarette test, TB117-2013 cigarette test  Weight ± 740 gr/m2  Abrasion resistance > 50.000

Fabric

Cover category A

 MU20 ivory
 MU27 light gray
 MU17 charcoal
 MU19 camel
 MU34 cloud
 MU24 denim blue
 MU18 honey
 Composizione 100% PP (polypropylene)  Easy to clean  Eco friendly Oeko-Tex Standard 100  Long life  Weight ± 580 gr/m2  Abrasion resistance > 70.000

Fabric

Cover category B

 KO20 cream
 KO29 light beige
 KO39 dark beige
 KO27 white black
 KO17 black white
 KO44 blue mix
 Composition 100% PL (polyester)  Eco friendly Oeko-Tex Standard 100  Long life  Fire resistant BS5852-1 cigarette test, TB117-2013 cigarette test  Weight ± 545 gr/m2  Abrasion resistance > 100.000

Fabric

Cover category B

 PI20 ice
 PI37 pink gray
 PI47 lead
 PI27 blue gray
 PI42 face powder
 PI22 coral
 PI52 rusty
 PI23 fern green
 PI34 ocean
 Composition 95% PL (polyester) 5% CO (cotton)  Stain cleanable  Water repellent  Soft touch  Weight ± 785 gr/m2  Abrasion resistance > 55.000

Fabric

Cover category B

 NU29 light beige
 NU59 sahara
 NU27 light gray
 NU49 taupe gray
 NU17 charcoal
 NU23 slate green
 NU32 salmon
 NU12 ruby
 Abrasion resistance > 100.000  Composition 100% PL (polyester)  Water repellent  Long life  Weight ± 805 gr/m2

Fabric

Cover category B

 CR20 pearl
 CR79 beige gray
 CR29 light taupe
 CR39 dark taupe
 CR17 charcoal
 CR14 navy blue
 CR42 face powder
 CR22 old rose
 Fire resistant UNI9175 1IM, EN1021-1 and -2, BS5852-1 cigarette test, BS5852-1 match test, TB117-2013 cigarette test  Composition 76% PVC (polyvinyl chloride) 22% PL (polyester)  Easy to clean  Antibacterial protection and phthalates free  Weight ± 540 gr/m2  Abrasion resistance > 60.000

Ecoleather (coated fabric)

Cover category B

 

 

CARE OF MATERIAL     SUGGESTIONS FOR CLEANING AND MAINTENANCE

 

KE - Directions for removing the most common dirt and stains:

Regular cleaning on ecoleather is recommended to maintain the original appearance of the upholstery and extend its life. Dust and dirt wear the coating, so periodic cleaning using a white cloth dampened with warm water is recommended. It is essential to act quickly on stains. Immediately remove any liquid substances or other residues to avoid absorption and permanent stains. Liquids should be absorbed with a napkin, absorbent paper or a white absorbent cloth. Non-greasy stains can be removed by dabbing gently with a damp sponge or a white lint-free cloth moistened with a solution of warm water and neutral soap. Do not use aggressive cleaning agents. Do not use bleaches, detergents, stain removers, degreasers, denatured alcohol, ammonia, solvents, other acidic, alkaline or abrasive cleaners as they could damage the material. If you want to use detergents other than neutral soap, we recommend that you test the product beforehand to check the effect and any discoloration in an area not exposed to sight, making sure that the material does not undergo any alterations. A clean, damp cotton cloth is ideal for most stains. Do not scrub vigorously, but try to remove the stain mainly by dabbing and making circular movements towards the center of the stain. For any drying it is preferable to use a clean cotton cloth. These tips are our recommendations only and do not guarantee complete stain removal. We assume no warranty for any damage caused by incorrect care, unsuitable cleaning agents or improper use.

 SE20 ivory
 SE39 dark beige
 SE59 earth
 SE49 chestnut
 SE33 dark green
 SE24 avio blue
 SE27 gray
 SE15 black
 Composition 100% PL (polyester)  Water repellent  Weight ± 580 gr/m2  Abrasion resistance > 35.000

Fabric

Cover category C

 PE20 pearl
 PO79 beige gray
 PO29 bark
 PO27 light gray
 PO37 gray
 PO17 charcoal
 PO18 yellow
 PO32 salmon
 PO12 strawberry
 PO22 pink
 PO23 slate green
 PO33 dark green
 PO24 avio blue
 PO14 navy blue
 Composition 100% PL (polyester)  Soft touch  Long life  Weight ± 525 gr/m2  Abrasion resistance > 100.000

Fabric

Cover category C

 AK29 light beige
 AK39 dark beige
 AK27 silver
 AK17 gray
 AK47 graphite
 AK34 heaven
 Composition 100% PP (polypropylene)
 PPL15 black
 PPL10 white
 PPL29 sand
 PPL69 old rose
 PPL23 sage green

Solid ashwood

matt tinted, open pore

 LT19 oak tinted ashwood
 LT29 canaletto walnut ashwood
 LT39 wenge tinted ashwood
 LT15 black tinted ashwood

Veneer ashwood

matt tinted, open pore

 IM19 oak tinted ashwood
 IM29 canaletto walnut ashwood
 IM39 wenge tinted ashwood
 IM15 black tinted ashwood

Steel

matt painted, semi embossed

 MV17 graphite
 MV10 white

Steel

painted with satin finish

 MS27 titanium
 MS28 brassed

Steel

painted with satin finish, antiqued by hand

 MA38 antiqued brass

Steel

polish, galvanized

 MG98 gold

Steel

polish, galvanized

 MC97 chromed

Aluminum

 AL15 black
 AL87 aluminum

Hard polyurethane

matt painted, semi embossed

 PUV10 white
 PUV17 graphite

Hard polyurethane

painted with satin finish

 PUS27 titanium
 PUS28 brassed

Hard polyurethane

painted with satin finish, antiqued by hand

 PUA38 antiqued brass

Glass ceramic

ceramic coupled with VE27 glass

 GP15 marquinia black
 GP10 statuary white
 GP19 emperador brown
 GP13 onix green

Glass

painted, tempered

 VE15 black
 VE10 white

Glass

semi transparent, tempered

 VS27 smoked gray

NOTES

  • For a consultation of the combinations selected by item, please refer to the technical data sheet of each product.
  • Colors of the materials shown on this page are purely indicative. The inevitable difference due to digital reproduction cannot be made subject to comparison with the final product. For best consultation, please refer to the decorative samples.
  • To find out more information on cleaning and care of materials, please refer to the technical data sheet of each product.
VAT IT 03074410303 Informative Privacy Policy Cookie Policy